
Erratum to “Fabrication and Evaluation of Single Layer Graphene/SnO2 Based Gas Sensor for NO2 Detection”
This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License(https://creativecommons.org/licenses/by-nc/3.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
The original version of this article (Vol. 33, No. 6, pp.493-498, http://dx.doi.org/10.46670/JSST.2024.33.6.498) contained an error in the acknowledgments.
Before Correction
ACKNOWLEDGMENT
This work was supported by the Technology Development Program (S3366415) funded by the Ministry of SMEs and Startups of Korea (MSS, Korea). Additionally, this study was conducted with the support of the Korea Institute of Industrial Technology under “Development of high-performance pressure sensor for self-diagnosis brake system of hybrid/electric vehicle (Kitech UI-24-0008)”.
After Correction
ACKNOWLEDGMENT
This work was supported by the Technology Development Program (S3366415) funded by the Ministry of SMEs and Startups of Korea (MSS, Korea). Additionally, this study was conducted with the support of the Korea Institute of Industrial Technology under “Development of high-performance pressure sensor for self-diagnosis brake system of hybrid/electric vehicle (Kitech UI-24-0008)”. This research was supported by the Korea Water Cluster (KWC) as Korea Water Cluster ProjectLab. This work was supported by the Technology Innovation Program (155736, Development of Miniaturized Sensor Module Technology for Non-invasive Arterial Blood Carbon Dioxide Real-time Monitoring) funded By the Ministry of Trade, Industry & Energy (MOTIE, Korea).